- When coils enter to tension reel,
the guide go forward receiving in - signal from detector
and stop by EPC photo detector as detecting edge of coil.
After rewinding finished, guide go backward to the base point
on guide by receiving out - signal from detector.
(To avoid collision with sensor as wide coil is enter.)
MODEL
Auto Strip Detecting Guide (PR-SSM-500S)
MOTER
15W
LIMIT
± 0.5mm
POWER OF CONTROL
DC 24V - 2A.
WEIGHT
30 kg
COLOR
BLACK (LUSTERLESS)
It is using to detect one side of edge of coils and lead one side be wound regularly.
MODEL
PRE-S200WL~S500WL
TYPE
PROJECTOR: LED OF INFRARED RAY
DETECTOR: PHOTO CELL
LIMIT
± 1mm
CONTROLLER
BY DIGITAL CONTROLLER
POWER OF CONTROL
DC 12V
RESOLUTION
± 0.2mm
LINEARITY
± 1.5%
AIR CONSUMPTION
400Nℓ/min
TEMPERATURE
-5℃ ~ 50℃
MODEL
S060W
S080W
S100W
DETECTION HEIGHT(mm)
60
80
100
WEIGHT(Kg)
4
4.5
5
MODEL
S200WL
S300WL
S400WL
S500WL
DETECTION HEIGHT(mm)
200
300
400
500
WEIGHT(Kg)
7.3
8
8.8
9.5
DETECTION DIA(mm)
Φ20
COLOR
BLACK (LUSTERLESS)
Motor Acutator
1. Adopting DC motor, Motor actuator is using to fast and precision control with zigzag and linear work.
2. Operated by electric power, it is eliminate possibility of leaking
oi unlike hydraulic system, it provides clean working place.
3. Less noise on working.
(We can make a distance by customer's order.
ex)15-50, 100, 150 / 50-100, 200, 250)
MODEL
PR-MA-15-80
PR-MA-50-180
ALLOWABLE THRUST
15(kgf)
50(kgf)
ALLOWABLE LOAD
300kg
1000kg
(AS APPLYING THE BEARING
COEFFICIENT OF FRICTION 0.05)
STROKE
80mm
180mm
WORKING SPEED
40mm/sec
20mm/sec
VOLTAGE
DC 24V * 15W
DC 24V * 40W
CURRENT
1.2A
2.2A
WEIGHT
4.5kg
10kg
Combined with detector and motor actuator makes up EPC system.
(It can be used for EPC, BEPC and UEPC.)
POWER SUPPLY
AC200~240V, 50/60Hz
CONSUMED ELECTRICITY
300VA(MAX)
TEMPERATURE
-5~ +40°C
WEIGHT
5kg
SENSOR
VOLTAGE: MAX. ±10V 2 LINES
PR-E20W, PR-B20N, PR-U20W
CENTERING SIGNAL
CONTACT INPUT
(DC 12~24V 3mA) (PR-12-4DN)
MOTOR ACTUATOR
PR-MA-15-80, 50-180
Please specify voltage and hertz as order.(no multiple use.)
306D (Use all sensor)
It is good for flexible packaging and for slow work.
(Widely usige for LCD film or below 50m/min of line speed.)
MODEL
PR-SV102N
MOTOR
A.C 220V~440V-50/60Hz (1hp)
OPERATION PRESSURE
1.0Mpa (10Kg/㎤)
MAX. FLOW
60Hz : 6.8ℓ/min
50Hz : 5.6ℓ/min
TEMPERATURE
0℃ ~ +40℃
OIL AMOUNT
18ℓ
STANDARD OIL
Regulator Oil 32 ~ 46
WEIGHT
60Kg (OIL EXCLUDED)
INSTALLATION
Horizontal.
ACCESSORIES
CYLINDER 50*s/t150*1ps(STANDARD)
HYD. HOSE 3M*2ps (STANDARD)
※Please specify voltage and hertz as order.(no multiple use.)
It is good for paper and nonferrous metals.
(Bronze, aluminum, magnesium and etc,..)
MODEL
PR-SV201N-F
MOTOR
A.C 220V~440V-60/50Hz (2hp)
OPERATION PRESSURE
3.0Mpa (30Kg/㎤)
MAX. FLOW
60Hz : 8.5L/min.
50Hz : 7.0L/min.
TEMPERATURE
0℃ ~ +40℃
OIL AMOUNT
35ℓ
STANDARD OIL
Regulator Oil 32 ~ 46
WEIGHT
65Kg (OIL EXCLUDED)
INSTALLATION
Horizontal.
ACCESSORIES
CYLINDER 50*s/t150*1ps(STANDARD)
HYD. HOSE 3M*2ps (STANDARD)
* It can be changed specification and size for improvement of products without notice.
EPC Sensor (Standard)
EPC control, PR-102E is using to control edge of transparent or opaque web with high precision.
Combined with sensitive detector and electro hydraulic servo valve. It make up EPC. It is excellent to detect and semi eternal life.
MODEL
PR-E20W
DETECTION DISTANCE
20mm
RESOLUTION
0.1mm
DETECTION METHOD
LIGHT REFLECTION(LED)
DETECTION ELEMENT
cds
FEEDBACK SPEED
0.01 sec
WEIGHT(HEAD, SCREW GUIDE)
0.82Kg
0.65Kg
※ W(sensor gap). 20mm, 30mm, 50mm, 70mm
Additional lifter can be use to all kinds of EPC for handy replacement of webs
MODEL
PR-102E
MOTOR
A.C 220V/380-60Hz (1hp)
OPERATION PRESSURE
1.0Mpa (10Kg/㎤)
MAX. FLOW
7.0ℓ/min
TEMPERATURE
0℃ ~ +50℃
OIL AMOUNT
18ℓ
STANDARD OIL
Regulator Oil 22 ~ 32
WEIGHT
55Kg (OIL EXCLUDED)
INSTALLATION
Horizontal
ACCESSORIES
CYLINDER 50*s/t150*1ps(STANDARD)
HYD. HOSE 3M*2ps (STANDARD)
※ Please specify voltage and hertz as order.(no multiple use.)
Beam EPC
BEPC control, PR-102B is using to control edge of transparent or opaque web with high precision.
Combined with photo detector which not affected by ambient light and electro hydraulic servo valve, it makes up BEPC. Especially good for opaque webs.
MODEL
PR-B20N
DETECTION DISTANCE
200mm
RESOLUTION
0.1mm
DETECTION METHOD
DIRECT REFLECTION
DETECTION ELEMENT
Photo. TR
FEEDBACK SPEED
0.01 sec
WEIGHT(HEAD, SCREW GUIDE)
1Kg
0.65Kg
Additional lifter can be use to all kinds of EPC for handy replacement of webs
MODEL
PR-102B
MOTOR
A.C 220V/380V-60Hz (1hp)
OPERATION PRESSURE
1.0Mpa (10Kg/㎤)
MAX. FLOW
7.0L/min
TEMPERATURE
0℃ ~ +50℃
OIL AMOUNT
18ℓ
STANDARD OIL
Regulator Oil 22 ~ 32
WEIGHT
55Kg (OIL EXCLUDED)
INSTALLATION
Horizontal
ACCESSORIES
CYLINDER 50*s/t150*1ps(STANDARD)
HYD. HOSE 3M*2ps (STANDARD)
※ Please specify voltage and hertz as order.(no multiple use.)
Line Follower Control (LFC)
LFC control, PR-102L is using to control line and edge of transparent or opaque web with high precision.
Combined with high sensitive detector and electric hydraulic servo valve. It makes up LFC.
MODEL
PR-L30W
DETECTION DISTANCE
30mm
RESOLUTION
0.1mm
DETECTION METHOD
LIGHT REFLECTION (LAMP)
DETECTION ELEMENT
cds
FEEDBACK SPEED
0.01 sec
WEIGHT(HEAD, SCREW GUIDE)
0.82Kg
0.65Kg
Additional lifter can be use to all kinds of EPC for handy replacement of webs
MODEL
PR-102L
MOTOR
A.C 220V/380V-60Hz (1hp)
OPERATION PRESSURE
1.0Mpa (10Kg/㎤)
MAX. FLOW
7.0L/min
TEMPERATURE
0℃ ~ +50℃
OIL AMOUNT
18ℓ
STANDARD OIL
Regular Oil 22 ~ 32
WEIGHT
55Kg (OIL EXCLUDED)
INSTALLATION
Horizontal
ACCESSORIES
CYLINDER 50*s/t150*1ps
(STANDARD)
HYD. HOSE 3M*2ps (STANDARD)
※ Please specify voltage and hertz as order.(no multiple use.)
Ultra-sonic EPC
UEPC control, PR-102US is using to control edge of transparent or opaque webs with high precision.
Combined with high sensitive ultrasonic detector and electric hydraulic servo valve, it makes up UEPC.
It is good to use for law speed of wrk and transparent webs.
MODEL
PR-DU50W
DETECTION DISTANCE
50mm
RESOLUTION
0.1mm
DETECTION METHOD
ULTRASONIC WAVE
DETECTION ELEMENT
ULTRASONIC WAVE
FEEDBACK SPEED
4ms
WEIGHT(HEAD, SCREW GUIDE)
0.73Kg
0.65Kg
Additional lifter can be use to all kinds of EPC for handy replacement of webs
MODEL
PR-102US
MOTOR
A.C 220V/380V-60Hz (1hp)
OPERATION PRESSURE
1.0Mpa (10Kg/㎤)
MAX. FLOW
7.0L/min.
TEMPERATURE
0℃ ~ +50℃
OIL AMOUNT
18ℓ
STANDARD OIL
Regular Oil 22 ~ 32
WEIGHT
55Kg (OIL EXCLUDED)
INSTALLATION
Horizontal
ACCESSORIES
CYLINDER 50*s/t150*1ps
(STANDARD)
HYD. HOSE 3M*2ps (STANDARD)
* It can be changed specification and size for improvement of products without notice.
Air EPC
AIR EDGE DETECT SENSOR
Combined with air detector and air hydraulic servo valve.
It is good to use at high temperature or mild acidic work.
MODEL
PR-S30W
DETECTION HEIGHT
30mm
DETECTION DISTANCE
10mm
RESOLUTION
0.1mm
AIR CONSUMPTION
45ℓ/min
PROVIDING PRESSURE
400mm H2O
WEIGHT (HEAD,HOSE)
0.55Kg
1Kg
WEIGHT (SCREW GUIDE)
0.65Kg
ACCESSORIES
PLASTIC HOSE 3M*2ps
BAND 6ps
MODEL
PR-C12 (CENTERING NOZZLE)
WEIGHT (HEAD, HOSE)
0.45Kg
0.5Kg
ACCESSORIES
PLASTIC HOSE 3M*1ps
BAND 2ps
※It can be changed specification and size for improvement of products without notice.
Combined with air detector and air hydraulic servo valve.
It is good to use at high temperature or mild acidic work.
MODEL
PR-106A- A/M, A/C
INPUT POWER
A.C 220
WEIGHT (A/M, A/C)
0.5Kg
0.4Kg
MODEL
PR106-A (400W - A/M, A/C)
MOTOR
A.C 220V/380V-60Hz (1/2hp)
MAX. PRESSURE
1Mpa (10Kg/㎤)
MAX. FLOW
4ℓ / min
AIR PRESSURE
400mm H2O
AIR AMOUNT
50ℓ/min
TEMPERATURE
0℃ ~ +40℃
OIL AMOUNT
12ℓ
STANDARD OIL
Regulator Oil 46
WEIGHT
32Kg (OIL EXCLUDED)
INSTALLATION
Horizontal
※Please specify voltage and hertz as order.(no multiple use.)
When servo valve does not move.
When valve is caught so not working
Then cylinder would be move to only one direction
Then cylinder would be move to only one direction
Trouble shooting
1.Seperate Front cover. (pic 1-1)
2. Press A position. If it is not pressed, it means valve is caught.
The reason valve is caught When B part got scratches or is dirty.
3. Seperate all parts like pic 1-3, then press or pul C position so that it will be released from the spool.
Keep press t until it moves softly.
4. If the valve still caught, Seperate the spool from the block pic 1-4, and clean D part and repeat above 3rd step.
But if the spool hot devere scratch, it is inevitable repairment.
หน้าแรก
สินค้า
ติดต่อเรา
เว็บบอร์ด
ต้องการเพื่อนร่วมงาน
